Instructions for making the Art Deco Cushion

 

 

 

Notions

  • 1.5 yards or 2 meters of black linen
  • 1/4 yard or .5 meter of contrasting fabric
  • zipper
  • Stitch out Streamline
  • 2 layers of "Cut Away" for the design Streamline

Fold and Iron 2 lengths of contrasting fabric 12 cm or 5 inches wide the strip of fabric once folded should measure 6 cm or 2.5 inches

Iron a deep hem on the 2 lengths of plain fabric. I used black linen fabric



Showing you the contrasting fabric folded

Showing you the black linen fabric with a deep hem

 
Cut the size cushion you would like for the front panel, I always cut more than I need
 
Stitch one of the contrasting strips to the cushion front panel
 
Lay one of the black panels that you had ironed with the deep hem over the contrasting panel and pin in place
 
Stitch a triple stitch to hold the black linen and contrasting fabric down. The triple stitch gives the cushion a lovely finish


Pin the other contrasting fabric and black linen fabric the same way as you did for the diagonal as for the horizontal
 
Once again stitch the tipple stitch to hold the piece down
 

I made a mistake when I stitched this deign out, I did not cut enough fabric for the cushion, so I cut out the design out. I cut around the design but I left enough hem around the design to satin stitch at a later time

I then went around the design using a straight stitch, this helps stabilize the area you will be satin stitching

I then zigzaged over the straight stitch

then over the zigzag stitch, stitch a zigzag stitch again. This gave the edge a lovely finish

 

Pin your design to the cushion, If you would feel more comfortable doing it the way I have just shown you

or mark where you would like your design to go using a template of "Streamline" and put it in your hoop with your stabilizer and stitch out "Streamline"

 

To place "Streamline" on the cushion I used a straight stitch beside the zigzag stitch to stitch the design down onto the cushion

 

Satin stitch the design down onto the cushion, I recommend you satin stitch twice

 
With your "square ruler" mark in chalk how big you would like the cushion, my cushion was about 14.5 inches or 36cm by 14.5 inches or 36cm


Marking the seams. I have used these little rulers for years for seams and other things, they are brilliant!!! I always purchase mine at my local dealer or Haberdashery Store, I always buy 3 at a time due to these rulers are rather fragile.
 
Pinning the cording around the cushion

  

Machine Embroidery Designs

 Latest Releases

 

Folklore Machine Embroidery Designs

Released on the 25th June 2019

 

 Folklore Machine Embroidery Designs by StitchingArt

  

6 designs included in the Folklore machine embroidery design set.

The Folklore design is suitable for a 6 x 10 inch or 240mm x 150mm hoop.

The Folklore design is available in DST, EMB, EXP, HUS, JEF, PES, VIP, VP3 and XXX.

The colour chart is included in the design set

As I am now digitizing with Wilcom embroidery software (which is a commercial software) we are unable to convert files to ART format. Bernina embroidery machines will now need to purchase designs in EMB or EXP format. Sorry for the inconvenience.

View the Folklore Machine Embroidery Designs

Mayil Machine Embroidery Designs

 
Mayil Machine Embroidery Designs

 Released on the 28th May 2019

6 designs included in the Mayil machine embroidery design set.

The Mayil design is suitable for a 14 x 8, 14 x 7 or 360mm x 200mm, 360mm x 150mm hoop.

The Mayil design is available in DST, EMB, EXP, HUS, JEF, PES, VIP, VP3 and XXX.

The colour chart is included in the design set

As I am now digitizing with Wilcom embroidery software (which is a commercial software) we are unable to convert files to ART format. Bernina embroidery machines will now need to purchase designs in EMB or EXP format. Sorry for the inconvenience.

View the Mayil Machine Embroidery Designs

 

springoflife4

 

Spring of Life Machine Embroidery Designs

 Released on the 27th April 2019

9 designs included in the Spring of Life machine embroidery design set.

The Spring of Life design is suitable for a 5 x 7, 6 x 10, 8 x 12 inch or 180mm x 130mm, 240mm x 150mm and 360mm x 200mm hoop.

The Spring of Life design is available in DST, EMB, EXP, HUS, JEF, PES, VIP, VP3 and XXX.

The colour chart and instructions are included in the design set

As I am now digitizing with Wilcom embroidery software (which is a commercial software) we are unable to convert files to ART format. Bernina embroidery machines will now need to purchase designs in EMB or EXP format. Sorry for the inconvenience.

 View the Spring of Life Machine Embroidery Designs

 

 

Wild and Free Machine Embroidery Designs

 

Wild and Free Machine Embroidery Designs

 Released on the 2nd February 2019

6 designs included in the Wild and Free machine embroidery design set.

The Wild and Free design is suitable for a 6 x 10 inch or 240mm x 150mm hoop.

The Wild and Free design is available in DST, EMB, EXP, HUS, JEF, PES, VIP, VP3 and XXX.

The colour chart and instructions are included in the design set

As I am now digitizing with Wilcom embroidery software (which is a commercial software) we are unable to convert files to ART format. Bernina embroidery machines will now need to purchase designs in EMB or EXP format. Sorry for the inconvenience.

 View the Wild and Free Machine Embroidery Designs