Jodhpur Wall Hanging

 

1

 

 

Measurements of Wall Hanging


Width of wall hanging 34 cm or 13.4 inches
Length of wall hanging is 67cm or 26.4 inches


Instructions to make wall hanging

  • 2 meters or 2 yards of silk for background fabric
  • 2 meters or 2 yards of narrow wadding
  • 8 meters or 8 yards of gold braid approximately

Stitch out the following designs

  • Jodhpur_02
  • Jodhpur_03 twice
  • Jodhpur_09 6 times
  • Jodhpur_10 Four times

  • Cut out fabric around 1 meter in length and ½ a meter wide
  • Mark the centre of the fabric using chalk or marking pen
  • Print out each design in actual size
  • Place each print out on the fabric and mark the centre of each design on your fabric

 

1

 

Stitch Jodhpur_02

 

2

 

Stitch Jodhpur_03

 

3

 

Under Jodhpur_03 which was previously stitched out, stitch Jodhpur_03 mirroring in your machine

 

4

 

  • Stitch out Jodhpur_09 six times
  • Stitch out Jodhpur_10 twice
  • Cut out each of the designs around the satin stitch border

 

5

 

  • Lightly glue each of the Jodhpur_09 panels down
  • Zigzag each of the panels down

 

6

 

This photo showing each of the six panels stitched using a zigzag stitch

 

7

 

Lightly glue the two Jodhpur_10 panels down then zigzag each panel down

 

8

 

Lightly glue the two Jodhpur_10 panels down then zigzag each panel down

 

9

 

The photo above showing a close up of the gold binding surrounding the wall hanging

 

10

 

To make the Wall hanging that little extra oomph, stitch on a dingle dangle or tassel

 

 

 

Jodhpur Cushion

 

11

 

The designs I used to create this cushion “Jodhpur_03” in the centre “Jodhpur_06” mirrored “Jodhpur_03”

 

 

12

 

The photo above showing you “Jodhpur_03” stitched

 

13

 

The photo above showing you “Jodhpur_06” stitched and then mirroring “Jodhpur_03”

 

Measurements of Wall Hanging
Width of wall hanging 34 cm or 13.4 inches
Length of wall hanging is 67cm or 26.4 inches
Instructions to make wall hanging
 2 meters or 2 yards of silk for background fabric
 2 meters or 2 yards of narrow wadding
 8 meters or 8 yards of gold braid approximately
Stitch out the following designs
 Jodhpur_02
 Jodhpur_03 twice
 Jodhpur_09 6 times
 Jodhpur_10 Four times
Cut out fabric around 1 meter in length and ½ a meter wide
Mark the centre of the fabric using chalk or marking pen
Print out each design in actual size
Place each print out on the fabric and mark the centre of each design on your fabric

  

Machine Embroidery Designs

 Latest Releases

 

Folklore Machine Embroidery Designs

Released on the 25th June 2019

 

 Folklore Machine Embroidery Designs by StitchingArt

  

6 designs included in the Folklore machine embroidery design set.

The Folklore design is suitable for a 6 x 10 inch or 240mm x 150mm hoop.

The Folklore design is available in DST, EMB, EXP, HUS, JEF, PES, VIP, VP3 and XXX.

The colour chart is included in the design set

As I am now digitizing with Wilcom embroidery software (which is a commercial software) we are unable to convert files to ART format. Bernina embroidery machines will now need to purchase designs in EMB or EXP format. Sorry for the inconvenience.

View the Folklore Machine Embroidery Designs

Mayil Machine Embroidery Designs

 
Mayil Machine Embroidery Designs

 Released on the 28th May 2019

6 designs included in the Mayil machine embroidery design set.

The Mayil design is suitable for a 14 x 8, 14 x 7 or 360mm x 200mm, 360mm x 150mm hoop.

The Mayil design is available in DST, EMB, EXP, HUS, JEF, PES, VIP, VP3 and XXX.

The colour chart is included in the design set

As I am now digitizing with Wilcom embroidery software (which is a commercial software) we are unable to convert files to ART format. Bernina embroidery machines will now need to purchase designs in EMB or EXP format. Sorry for the inconvenience.

View the Mayil Machine Embroidery Designs

 

springoflife4

 

Spring of Life Machine Embroidery Designs

 Released on the 27th April 2019

9 designs included in the Spring of Life machine embroidery design set.

The Spring of Life design is suitable for a 5 x 7, 6 x 10, 8 x 12 inch or 180mm x 130mm, 240mm x 150mm and 360mm x 200mm hoop.

The Spring of Life design is available in DST, EMB, EXP, HUS, JEF, PES, VIP, VP3 and XXX.

The colour chart and instructions are included in the design set

As I am now digitizing with Wilcom embroidery software (which is a commercial software) we are unable to convert files to ART format. Bernina embroidery machines will now need to purchase designs in EMB or EXP format. Sorry for the inconvenience.

 View the Spring of Life Machine Embroidery Designs

 

 

Wild and Free Machine Embroidery Designs

 

Wild and Free Machine Embroidery Designs

 Released on the 2nd February 2019

6 designs included in the Wild and Free machine embroidery design set.

The Wild and Free design is suitable for a 6 x 10 inch or 240mm x 150mm hoop.

The Wild and Free design is available in DST, EMB, EXP, HUS, JEF, PES, VIP, VP3 and XXX.

The colour chart and instructions are included in the design set

As I am now digitizing with Wilcom embroidery software (which is a commercial software) we are unable to convert files to ART format. Bernina embroidery machines will now need to purchase designs in EMB or EXP format. Sorry for the inconvenience.

 View the Wild and Free Machine Embroidery Designs