Print

 

Colour Burst Bag

 

0

 

Front of Bag

 

1

 

Back of Bag

 

The bag measures 16.5 x 18 cm or 6.5 x 7.1 inches approximately

 

What you need

 

Stitch out the following designs

 

2

 

Stitch out “Colour Burst_01” I used a very fine silk.

Take the hoop out of the machine.

Please do not take the design out of the hoop

 

3

 

Before you lay the lining onto the hoop:

 

 

 

6

 

With a sharp pair of scissors cut away from the design any excess fabric

 

7

 

All the excess fabric cut away from the main design. I never cut to close to the outline stitches

Insert the hoop back into your machine so the satin stitch can be sewn with your machine.

 

8

 

This section of the bag is now finished and you can take the design out of the hoop

 

9

 

Using a very sharp pair of scissors cut as close as you can to the satin stitch border. Start of by cutting with a large pair of scissors and then change to a very small pair of scissors. The smaller scissors can cut into the rounded area more easily.

 

10

 

All the fabric cut away from the satin stitch border

 

11

 

Once you have finished stitching out “Colour Burst_02” take the design out of your hoop

 

12

 

Measure all around the design “Colour Burst_02” 1.5 cm or 5/8 inch seam allowance

 

13

 

Cut away any excess fabric from your seam allowance

 

Colour Burst Machine Embroidery Designs

 

At this time cut around both the front and back panels of your lining

 

14

 

 

15

 

On the flap of the bag stitch over the satin stitch border a very close zigzag stitch but not quite a satin stitch this just gives the flap a nice finish

 

16

 

On the front and back panels mark clearly the centre of each panel top and bottom

 

17

 

On both the front and back panels top and bottom stitch two rows of a large straight stitch so you can eventually gather the stitches

 

18

 

Showing you the two rows of straight stitches which will be your gathering stitches

 

19

 

Gathering both top and bottom stitches on the front and back panel

 

20

 

Gather the stitches front and back at the top panel to measure the same size as the flap of the bag

 

21

 

Gather the top and back panels at the bottom of each panel to measure the same width 5.9 inches or 15cm this includes the seam allowance

 

22

 

Stitch a hem on the top of each front and back panels

 

23

 

Press using your steam iron the seam at the top of the bag

 

24

 

Mark each front and back panel the centre

 

25

 

I did not bother gathering the lining fabric, I pleated, I find this a lot easier as I can keep the centre markings of the front and back panels matching the centre markings of the front and back lining

 

26

 

Hand sew the lining to the front and back panels of the bag

 

27

 

Using your straight stitch on your sewing machine, stitch over your hand stitching

 

28

 

 

29

 

Showing you pinning the flap to the back panel of the bag

 

Colour Burst Machine Embroidery Designs

 

Hand stitch the flap piece to the back of the bag