Saffron Wall Hanging

 

 

1

 

Stitch out the following designs

Saffron_01 to Saffron_16

 

1

 

  • Once you have stitched all the designs out, place the designs as I have shown in the photograph above on fabric. I used calico.
  • Once you have the designs placed correctly, mark the centre of your background fabric, as this is where you will start gluing and stitching each of the designs down
  • Start of with “Safron_06” lightly gluing it down and zigzagging on the background fabric, then “Saffron_10” “Saffron_07” and “Saffron_11” and so on

 

2

 

This photo is showing you the zigzagging of each panel onto the background fabric (This photo is of the back of the fabric)

  • Once you have zigzagged all the panels down, I suggest you satin stitch each of the panels

 

3

 

This photo showing you satin stitch (Once again the back of the fabric)

 

4

 

5

 

  • Cut away the background fabric around the bottom of the wall hanging and then satin stitch once again
  • Cut fabric strips as seen in pink for the sides and top of the wall hanging

 

6

 

Use similar coloured piping as the background fabric for the Wall hanging and attached the piping to the gingham fabric then stitched the same fabric that is in the background fabric in the wall hanging for the end, as you can see in the photo above

 

7

 

Add tassells

 

 

 

The following photos are close ups of the detail in some of the panels

 

8

 

9

 

10

 

11

 

12

 

13

 

14

 

15

 

16

 

 

 

 

 

Saffron Bag

 

 

17

 

Stitch out the following designs:

  • Saffron_17
  • Saffron_18
  • Saffron_19
  • Saffron_20
  • Saffron_21_bag side stitch two
  • Saffron_22_ bag base stitch two
  • Saffron_23_bag base_large stitch one (this design is for those who have a larger hoop)

 

18

 

  • Follow the colour chart as this gives you the step by step instructions
  • The above photo showing the hoop taken out of the machine

 

19

 

The above photo showing you the hoop taken out of the sewing machine and lining fabric over the back of the design, lightly glue the lining down as this makes it so much easier to place the hoop back in the machine without any problems of fabric folding in on itself

 

20

 

If you wish to put in pockets in your lining

 

21

 

Once you have stitched all the panels out, stitch both the front and back panels together also for all the other panels using a zigzag stitch.

 

22

 

Stitch each of the two side panels to the front panel

 

23

 

The above photo showing you both the side panels stitched to the front panel

 

24

 

  • Stitch the base panel to the front panel
  • Stitch the back panel to one of the side panels

 

25

 

26

 

  • Stitch the back panel to the base panel
  • Stitch the side panels to the base panel
  • Stitch the rest of the panels together
  • Place handles on the bag

  

Machine Embroidery Designs

 Latest Releases

 

Folklore Machine Embroidery Designs

Released on the 25th June 2019

 

 Folklore Machine Embroidery Designs by StitchingArt

  

6 designs included in the Folklore machine embroidery design set.

The Folklore design is suitable for a 6 x 10 inch or 240mm x 150mm hoop.

The Folklore design is available in DST, EMB, EXP, HUS, JEF, PES, VIP, VP3 and XXX.

The colour chart is included in the design set

As I am now digitizing with Wilcom embroidery software (which is a commercial software) we are unable to convert files to ART format. Bernina embroidery machines will now need to purchase designs in EMB or EXP format. Sorry for the inconvenience.

View the Folklore Machine Embroidery Designs

Mayil Machine Embroidery Designs

 
Mayil Machine Embroidery Designs

 Released on the 28th May 2019

6 designs included in the Mayil machine embroidery design set.

The Mayil design is suitable for a 14 x 8, 14 x 7 or 360mm x 200mm, 360mm x 150mm hoop.

The Mayil design is available in DST, EMB, EXP, HUS, JEF, PES, VIP, VP3 and XXX.

The colour chart is included in the design set

As I am now digitizing with Wilcom embroidery software (which is a commercial software) we are unable to convert files to ART format. Bernina embroidery machines will now need to purchase designs in EMB or EXP format. Sorry for the inconvenience.

View the Mayil Machine Embroidery Designs

 

springoflife4

 

Spring of Life Machine Embroidery Designs

 Released on the 27th April 2019

9 designs included in the Spring of Life machine embroidery design set.

The Spring of Life design is suitable for a 5 x 7, 6 x 10, 8 x 12 inch or 180mm x 130mm, 240mm x 150mm and 360mm x 200mm hoop.

The Spring of Life design is available in DST, EMB, EXP, HUS, JEF, PES, VIP, VP3 and XXX.

The colour chart and instructions are included in the design set

As I am now digitizing with Wilcom embroidery software (which is a commercial software) we are unable to convert files to ART format. Bernina embroidery machines will now need to purchase designs in EMB or EXP format. Sorry for the inconvenience.

 View the Spring of Life Machine Embroidery Designs

 

 

Wild and Free Machine Embroidery Designs

 

Wild and Free Machine Embroidery Designs

 Released on the 2nd February 2019

6 designs included in the Wild and Free machine embroidery design set.

The Wild and Free design is suitable for a 6 x 10 inch or 240mm x 150mm hoop.

The Wild and Free design is available in DST, EMB, EXP, HUS, JEF, PES, VIP, VP3 and XXX.

The colour chart and instructions are included in the design set

As I am now digitizing with Wilcom embroidery software (which is a commercial software) we are unable to convert files to ART format. Bernina embroidery machines will now need to purchase designs in EMB or EXP format. Sorry for the inconvenience.

 View the Wild and Free Machine Embroidery Designs