Four Seasons - Summer Instructions

Design measurements

32 x 44cm or 12.5 x 17.3 inches

Stitch out the following

  • 1 x Summer Garden_01 
  • 4 x Summer Garden_02 
  • 4 x Summer Garden_03 
  • 2 x Summer Garden_04
     
  • 2 x Summer Garden_05 
  • 2 x Summer Garden_06

Four Seasons - Summer Instructions

Cut out your background fabric 48 x 48 cm or 19 x 19 inch approximately

Four Seasons - Summer Instructions

Mark the centre of the background fabric

Four Seasons - Summer Instructions

 

Hoop the background fabric in the centre and proceed to stitch out “Summer Garden_01”

 

Four Seasons - Summer Instructions

 

Once you have stitched out “Summer Garden_01” lightly glue down the four ”Summer Garden_02” down on the background fabric as shown in the photograph above

Zigzag stitch each of the “Summer Garden_02” over the satin stitch borders

 

Four Seasons - Summer Instructions

 

 

Four Seasons - Summer Instructions

 

The above photograph showing a close up of the satin stitch borders zigzagged stitched down to the background fabric

Lightly glue each of the “Summer Garden_03”down as shown in the photograph above

Zigzag stitch each of the “Summer Garden_03”over the satin stitch borders

 

Four Seasons - Summer Instructions

 

The above photograph showing you “Summer Garden_04, Summer Garden_05 and Summer Garden_06”lightly glued down to the background fabric

 

Four Seasons - Summer Instructions

 

The photograph above showing you all the designs zigzagged stitched over the satin stitch borders

 

Four Seasons - Summer Instructions

 

 

Four Seasons - Summer Instructions

 

To bring all the designs together and have a bit fun using your decorative stitches that you have in your machine, stitch over the satin stitch borders that you had zigzagged down. As you can see in the above and below photographs

 

Four Seasons - Summer Instructions

 

 

Four Seasons - Summer Instructions

 

 

Four Seasons - Summer Instructions

 

 

Four Seasons - Summer Instructions

 

 

  

Machine Embroidery Designs

 Latest Releases

 

Folklore Machine Embroidery Designs

Released on the 25th June 2019

 

 Folklore Machine Embroidery Designs by StitchingArt

  

6 designs included in the Folklore machine embroidery design set.

The Folklore design is suitable for a 6 x 10 inch or 240mm x 150mm hoop.

The Folklore design is available in DST, EMB, EXP, HUS, JEF, PES, VIP, VP3 and XXX.

The colour chart is included in the design set

As I am now digitizing with Wilcom embroidery software (which is a commercial software) we are unable to convert files to ART format. Bernina embroidery machines will now need to purchase designs in EMB or EXP format. Sorry for the inconvenience.

View the Folklore Machine Embroidery Designs

Mayil Machine Embroidery Designs

 
Mayil Machine Embroidery Designs

 Released on the 28th May 2019

6 designs included in the Mayil machine embroidery design set.

The Mayil design is suitable for a 14 x 8, 14 x 7 or 360mm x 200mm, 360mm x 150mm hoop.

The Mayil design is available in DST, EMB, EXP, HUS, JEF, PES, VIP, VP3 and XXX.

The colour chart is included in the design set

As I am now digitizing with Wilcom embroidery software (which is a commercial software) we are unable to convert files to ART format. Bernina embroidery machines will now need to purchase designs in EMB or EXP format. Sorry for the inconvenience.

View the Mayil Machine Embroidery Designs

 

springoflife4

 

Spring of Life Machine Embroidery Designs

 Released on the 27th April 2019

9 designs included in the Spring of Life machine embroidery design set.

The Spring of Life design is suitable for a 5 x 7, 6 x 10, 8 x 12 inch or 180mm x 130mm, 240mm x 150mm and 360mm x 200mm hoop.

The Spring of Life design is available in DST, EMB, EXP, HUS, JEF, PES, VIP, VP3 and XXX.

The colour chart and instructions are included in the design set

As I am now digitizing with Wilcom embroidery software (which is a commercial software) we are unable to convert files to ART format. Bernina embroidery machines will now need to purchase designs in EMB or EXP format. Sorry for the inconvenience.

 View the Spring of Life Machine Embroidery Designs

 

 

Wild and Free Machine Embroidery Designs

 

Wild and Free Machine Embroidery Designs

 Released on the 2nd February 2019

6 designs included in the Wild and Free machine embroidery design set.

The Wild and Free design is suitable for a 6 x 10 inch or 240mm x 150mm hoop.

The Wild and Free design is available in DST, EMB, EXP, HUS, JEF, PES, VIP, VP3 and XXX.

The colour chart and instructions are included in the design set

As I am now digitizing with Wilcom embroidery software (which is a commercial software) we are unable to convert files to ART format. Bernina embroidery machines will now need to purchase designs in EMB or EXP format. Sorry for the inconvenience.

 View the Wild and Free Machine Embroidery Designs