Nordic Delight Machine Embroidery Designs

 

Size of Bag is:

30 length x 22 width cm
Or
12 length x 8 ½ width inches

What you will need:

  • 1 meter or 1 yard of black and grey stripped cotton fabric
  • 1 meter or 1 yard of thin wadding
  • Tear Away or Stitch and Tear stabilizer
  • 2 bag handles 38 cm or 15 inches in length
  • 3 meters or 3 yards 1.5cm wide Black ric rac
  • 1 meter or 1 yard of lining
  • Metal magnetic clasp

 

 

 

Nordic Delight Machine Embroidery Designs

 

The photo above showing you

  • 2 layers of stitch and tear stabilizer
  • Thin wadding
  • Black and grey stripped cotton fabric

 

Nordic Delight Machine Embroidery Designs

 

1. Stitch out “Nordic Delight_01” then mirror in either your sewing machine or software “Nordic Delight_01”
2. Cut the fabric for the top of the bag leaving 10cm or 4 inches from the top of the design and from the base 8cm or 3 inches
3. Cut fabric for the back the same length and width as the front of the bag
4. At this stage I recommend you also cut the lining for the bag
5. Add the black ric rac to either side of your design
6. Stitch the front, back and side seams together

 

Nordic Delight Machine Embroidery Designs

 

7. For the front of the bag measure 5 cm or 2 inches from the stitched seam as you can see in the photo above

 

Nordic Delight Machine Embroidery Designs

 

For the Back of the bag measure 5 cm or 2 inches from the stitched seam as you can see in the photo above

 

Nordic Delight Machine Embroidery Designs

 

With the sewn fabric still right sides together, using both hands, pinch and pull apart the corner. While you keep pulling, the fabric will begin to make a little peak with the corner point at the top and the seam lines running down the middle of the front and the back. Match these side and bottom seams. Place a pin in the seams to hold them together. It is very important that you exactly match the seams; that is what will make the lines of your finished bag look great.

 

Nordic Delight Machine Embroidery Designs

 

10. Sew across the peak on the drawn line. Be sure to backstitch at the beginning and end of the seam.

 

Nordic Delight Machine Embroidery Designs

 

11. Trim away the peaks

 

Nordic Delight Machine Embroidery Designs

 

Nordic Delight Machine Embroidery Designs

 

12. Repeat for the lining the numbers from 7 through to 8
13. Insert the Metal magnetic clasp into your lining
14. So as the metal clasp do not clasp together I put painters tape over each of the clasps, this makes sewing the top of the bag so much easier
15. Insert the lining of the bag into the black and grey stripped bag

 

Nordic Delight Machine Embroidery Designs

 

16. At the top of the bag fold the black and grey fabric down to make a small hem and then iron, once again fold over the fabric lining and re iron
17. Stitch the ironed fold that is over the lining down
18. To cover the stitching at the top of the bag I stitched the black ric rac, which also gives the bag a nice finish
19. Stitch the bag handles onto your bag

  

Machine Embroidery Designs

 Latest Releases

 

Folklore Machine Embroidery Designs

Released on the 25th June 2019

 

 Folklore Machine Embroidery Designs by StitchingArt

  

6 designs included in the Folklore machine embroidery design set.

The Folklore design is suitable for a 6 x 10 inch or 240mm x 150mm hoop.

The Folklore design is available in DST, EMB, EXP, HUS, JEF, PES, VIP, VP3 and XXX.

The colour chart is included in the design set

As I am now digitizing with Wilcom embroidery software (which is a commercial software) we are unable to convert files to ART format. Bernina embroidery machines will now need to purchase designs in EMB or EXP format. Sorry for the inconvenience.

View the Folklore Machine Embroidery Designs

Mayil Machine Embroidery Designs

 
Mayil Machine Embroidery Designs

 Released on the 28th May 2019

6 designs included in the Mayil machine embroidery design set.

The Mayil design is suitable for a 14 x 8, 14 x 7 or 360mm x 200mm, 360mm x 150mm hoop.

The Mayil design is available in DST, EMB, EXP, HUS, JEF, PES, VIP, VP3 and XXX.

The colour chart is included in the design set

As I am now digitizing with Wilcom embroidery software (which is a commercial software) we are unable to convert files to ART format. Bernina embroidery machines will now need to purchase designs in EMB or EXP format. Sorry for the inconvenience.

View the Mayil Machine Embroidery Designs

 

springoflife4

 

Spring of Life Machine Embroidery Designs

 Released on the 27th April 2019

9 designs included in the Spring of Life machine embroidery design set.

The Spring of Life design is suitable for a 5 x 7, 6 x 10, 8 x 12 inch or 180mm x 130mm, 240mm x 150mm and 360mm x 200mm hoop.

The Spring of Life design is available in DST, EMB, EXP, HUS, JEF, PES, VIP, VP3 and XXX.

The colour chart and instructions are included in the design set

As I am now digitizing with Wilcom embroidery software (which is a commercial software) we are unable to convert files to ART format. Bernina embroidery machines will now need to purchase designs in EMB or EXP format. Sorry for the inconvenience.

 View the Spring of Life Machine Embroidery Designs

 

 

Wild and Free Machine Embroidery Designs

 

Wild and Free Machine Embroidery Designs

 Released on the 2nd February 2019

6 designs included in the Wild and Free machine embroidery design set.

The Wild and Free design is suitable for a 6 x 10 inch or 240mm x 150mm hoop.

The Wild and Free design is available in DST, EMB, EXP, HUS, JEF, PES, VIP, VP3 and XXX.

The colour chart and instructions are included in the design set

As I am now digitizing with Wilcom embroidery software (which is a commercial software) we are unable to convert files to ART format. Bernina embroidery machines will now need to purchase designs in EMB or EXP format. Sorry for the inconvenience.

 View the Wild and Free Machine Embroidery Designs