Instructions for making the 4 small panels on a large panel

 

 

 

I used the following for each of the panels
  • 2 very fine panels of wadding
  • Thick wool wadding
  • Thai silk
  • Silk organza
 
I have no idea what you call this waxed type of paper with the sticky glue below the wax. I did purchase it from http://www.stirlingembroidery.com
 
I hoop the wax paper
 
Get a pin and go around as I have done in the following photographs
 
Lift the wax paper away from you went around with the pin


 


With your scissors cut away from the pin area as shown above
 
After you have used the scissors
 
Take the wax paper away from the sides
 
This reveals sticky side around the hoop area


Place your fabric over the sticky paper inside your hoop


The silk is now ready for you to put onto your machine
 
 
 
Place your stabilizers underneath the hoop


 
 
Place the silk organza on top of the silk

I use silk organza often and I keep many shades of the very fine silk organza in my stash

TIP

Why I like to have many different colour's of the silk organza is for the reason why I am using it to do this work. The bright pink Thai silk that I had selected for "I am Woman" was just to bright for the patterned Thai silk background so I used the silk organza which matched the patterned Thai silk beautifully. You might keep this in mind when next time you just cannot match up with another fabric
 
Stitched out


Cut away as much as you can all your stabilizer
 
I purchased from the $2.00 shop the canvas
 
Before laying the Thai silk on the canvas I sprayed glued the canvas and put thick wadding over the the canvas
I framed the canvas with each of the designs using a staple gun
 
Framed
 
On the main canvas board I also spayed glue on the canvas and put thick wadding over the top of the canvas
 
I used a staple gun to frame the Thai silk over the canvas
 
To get an exact place to staple each of the four panels I used pins. I placed pins around each of the panels which goes through to the other side of the main canvas
 
Showing you the back of the canvas with all the placement pins
 
All four panels placed with pins.

I then turned the main canvas over and then started madly stapling using the staple gun

  

Machine Embroidery Designs

 Latest Releases

 

Folklore Machine Embroidery Designs

Released on the 25th June 2019

 

 Folklore Machine Embroidery Designs by StitchingArt

  

6 designs included in the Folklore machine embroidery design set.

The Folklore design is suitable for a 6 x 10 inch or 240mm x 150mm hoop.

The Folklore design is available in DST, EMB, EXP, HUS, JEF, PES, VIP, VP3 and XXX.

The colour chart is included in the design set

As I am now digitizing with Wilcom embroidery software (which is a commercial software) we are unable to convert files to ART format. Bernina embroidery machines will now need to purchase designs in EMB or EXP format. Sorry for the inconvenience.

View the Folklore Machine Embroidery Designs

Mayil Machine Embroidery Designs

 
Mayil Machine Embroidery Designs

 Released on the 28th May 2019

6 designs included in the Mayil machine embroidery design set.

The Mayil design is suitable for a 14 x 8, 14 x 7 or 360mm x 200mm, 360mm x 150mm hoop.

The Mayil design is available in DST, EMB, EXP, HUS, JEF, PES, VIP, VP3 and XXX.

The colour chart is included in the design set

As I am now digitizing with Wilcom embroidery software (which is a commercial software) we are unable to convert files to ART format. Bernina embroidery machines will now need to purchase designs in EMB or EXP format. Sorry for the inconvenience.

View the Mayil Machine Embroidery Designs

 

springoflife4

 

Spring of Life Machine Embroidery Designs

 Released on the 27th April 2019

9 designs included in the Spring of Life machine embroidery design set.

The Spring of Life design is suitable for a 5 x 7, 6 x 10, 8 x 12 inch or 180mm x 130mm, 240mm x 150mm and 360mm x 200mm hoop.

The Spring of Life design is available in DST, EMB, EXP, HUS, JEF, PES, VIP, VP3 and XXX.

The colour chart and instructions are included in the design set

As I am now digitizing with Wilcom embroidery software (which is a commercial software) we are unable to convert files to ART format. Bernina embroidery machines will now need to purchase designs in EMB or EXP format. Sorry for the inconvenience.

 View the Spring of Life Machine Embroidery Designs

 

 

Wild and Free Machine Embroidery Designs

 

Wild and Free Machine Embroidery Designs

 Released on the 2nd February 2019

6 designs included in the Wild and Free machine embroidery design set.

The Wild and Free design is suitable for a 6 x 10 inch or 240mm x 150mm hoop.

The Wild and Free design is available in DST, EMB, EXP, HUS, JEF, PES, VIP, VP3 and XXX.

The colour chart and instructions are included in the design set

As I am now digitizing with Wilcom embroidery software (which is a commercial software) we are unable to convert files to ART format. Bernina embroidery machines will now need to purchase designs in EMB or EXP format. Sorry for the inconvenience.

 View the Wild and Free Machine Embroidery Designs