Reservation Wall Hanging

 

Height 55cm 21.5 inches
Width 39cm 15.3 inches

 

Notions

I purchased this linen while in Townsville, Queensland from Stitches and Spice. The web site of Stitches and Spice is: http://www.stitchesandspice.com.au

I chose the linen fabric for the mottled colours which are similar to the Oklahoma dirt.

2 packets of fine cooper wire

Wooden dowel very thin 4mm wide x 2.4 meters long (you can purchase the dowel from most hardware stores)








Indian

Pat_05 and Pat_05a

Pat_04


 Pat_05b and Pat_05c

Pat_05c_sm


Pat_05_sm and Pat_05b_sm

Triangles

 

 

Instructions 

 

Stitch the Indian out first and then the rest of the designs


 

From your sewing machine select either similar or use your own stitches from the decorative stitches in your sewing machine for the background. I used my Pfaff 7570 stitches


 

Frey the sides of the linen....The bottom end of the wall hanging I cut close but not to close to the zigzag as you can see in the last photo above I let a few linen pieces hang down


 

Cut 5cm 2 inches from either side of the linen piece for the sides, zigzag stitch on either side to stop fraying (You do not want to over do the fraying)


 

Mark on the wall hanging and side pieces where you would like to lace the cooper wire


 

In your decorative stitches from your machine you should have a similar stitch for threading your cooper wire through....A decorative stitch you can put a small hole through


 

Apply the triangles on the side pieces ....I used a zigzag stitch to apply each triangle


 

Thread the wire through....This is very fiddle, sit down and watch a number of movies while doing this....make sure you have good wire cutters

 

MINITURE QUILTS that hang down from the main quilt

 

The miniature quilts you can see in the photo s...Stitch all three out and then frey the edges all around

You can see in the photo what I did with the wooden dowels and cooper wire approximately 7 x 8 cm 2.75 x 3inches each is different in size, you do not want all to be the same size

Attach the 3 mini quilts to the wooden dowel as in the photos

Attach the mini quilts and dowel with the cooper wire to the wall hanging as seen in the photo

 

 

 

  

Machine Embroidery Designs

 Latest Releases

 

Folklore Machine Embroidery Designs

Released on the 25th June 2019

 

 Folklore Machine Embroidery Designs by StitchingArt

  

6 designs included in the Folklore machine embroidery design set.

The Folklore design is suitable for a 6 x 10 inch or 240mm x 150mm hoop.

The Folklore design is available in DST, EMB, EXP, HUS, JEF, PES, VIP, VP3 and XXX.

The colour chart is included in the design set

As I am now digitizing with Wilcom embroidery software (which is a commercial software) we are unable to convert files to ART format. Bernina embroidery machines will now need to purchase designs in EMB or EXP format. Sorry for the inconvenience.

View the Folklore Machine Embroidery Designs

Mayil Machine Embroidery Designs

 
Mayil Machine Embroidery Designs

 Released on the 28th May 2019

6 designs included in the Mayil machine embroidery design set.

The Mayil design is suitable for a 14 x 8, 14 x 7 or 360mm x 200mm, 360mm x 150mm hoop.

The Mayil design is available in DST, EMB, EXP, HUS, JEF, PES, VIP, VP3 and XXX.

The colour chart is included in the design set

As I am now digitizing with Wilcom embroidery software (which is a commercial software) we are unable to convert files to ART format. Bernina embroidery machines will now need to purchase designs in EMB or EXP format. Sorry for the inconvenience.

View the Mayil Machine Embroidery Designs

 

springoflife4

 

Spring of Life Machine Embroidery Designs

 Released on the 27th April 2019

9 designs included in the Spring of Life machine embroidery design set.

The Spring of Life design is suitable for a 5 x 7, 6 x 10, 8 x 12 inch or 180mm x 130mm, 240mm x 150mm and 360mm x 200mm hoop.

The Spring of Life design is available in DST, EMB, EXP, HUS, JEF, PES, VIP, VP3 and XXX.

The colour chart and instructions are included in the design set

As I am now digitizing with Wilcom embroidery software (which is a commercial software) we are unable to convert files to ART format. Bernina embroidery machines will now need to purchase designs in EMB or EXP format. Sorry for the inconvenience.

 View the Spring of Life Machine Embroidery Designs

 

 

Wild and Free Machine Embroidery Designs

 

Wild and Free Machine Embroidery Designs

 Released on the 2nd February 2019

6 designs included in the Wild and Free machine embroidery design set.

The Wild and Free design is suitable for a 6 x 10 inch or 240mm x 150mm hoop.

The Wild and Free design is available in DST, EMB, EXP, HUS, JEF, PES, VIP, VP3 and XXX.

The colour chart and instructions are included in the design set

As I am now digitizing with Wilcom embroidery software (which is a commercial software) we are unable to convert files to ART format. Bernina embroidery machines will now need to purchase designs in EMB or EXP format. Sorry for the inconvenience.

 View the Wild and Free Machine Embroidery Designs