Jodhpur Machine Embroidery Design Instructions
Jodhpur Wall Hanging
Measurements of Wall Hanging
Width of wall hanging 34 cm or 13.4 inches
Length of wall hanging is 67cm or 26.4 inches
Instructions to make wall hanging
- 2 meters or 2 yards of silk for background fabric
- 2 meters or 2 yards of narrow wadding
- 8 meters or 8 yards of gold braid approximately
Stitch out the following designs
- Jodhpur_02
- Jodhpur_03 twice
- Jodhpur_09 6 times
- Jodhpur_10 Four times
- Cut out fabric around 1 meter in length and ½ a meter wide
- Mark the centre of the fabric using chalk or marking pen
- Print out each design in actual size
- Place each print out on the fabric and mark the centre of each design on your fabric
Stitch Jodhpur_02
Stitch Jodhpur_03
Under Jodhpur_03 which was previously stitched out, stitch Jodhpur_03 mirroring in your machine
Stitch out Jodhpur_09 six times
Stitch out Jodhpur_10 twice
Cut out each of the designs around the satin stitch border
Lightly glue each of the Jodhpur_09 panels down
Zigzag each of the panels down
This photo showing each of the six panels stitched using a zigzag stitch
Lightly glue the two Jodhpur_10 panels down then zigzag each panel down
Lightly glue the two Jodhpur_10 panels down then zigzag each panel down
This photo showing a close up of the gold binding surrounding the wall hanging
To make the Wall hanging that little extra oomph, stitch on a dingle dangle or tassel
Jodhpur Cushion
The designs I used to create this cushion “Jodhpur_03” in the centre “Jodhpur_06” mirrored “Jodhpur_03”
This photo is showing you “Jodhpur_03” stitched
This photo is showing you “Jodhpur_06” stitched and then mirroring “Jodhpur_03”