|
|
|
|
![](/images/stories/instbring1.jpg) |
|
|
![](/images/stories/instbring.jpg) |
- Stitch 1 of each design 111, 222, 333
- Stitch 6 of each Square_01 and Square_02
- Cut each square away from the fabric
- When cutting each square with your scissors I suggest you have the design to the right of your scissors, in that way you do not cut any of the satin stitch border
- Spray the back of the square for easy placement on the fabric
|
|
![](/images/stories/instbring2.jpg) |
- Centre 222 on the base fabric
- I used a zig zag stitch to stitch the design down...You do not need to do a satin stitch due to I have alread digitized the border for you
|
|
![](/images/stories/instbring3.jpg) |
- Once you have stitched 222 design down then stitch 111 and 333 designs
|
|
![](/images/stories/instbring4.jpg) |
Stitch down square_02 and square_03 as shown below |
|
![](/images/stories/instbring5.jpg) |
- After I had completed putting all the squares together
- Put a thick wadding under your work with a piece of fabric under the wadding, I used an old bed sheet
- Then triple stitch between each square
- If you wish put a binding around the work
|